<progress id="wtla9"><track id="wtla9"></track></progress>
<rp id="wtla9"><ruby id="wtla9"><input id="wtla9"></input></ruby></rp>
  • <th id="wtla9"><track id="wtla9"><dl id="wtla9"></dl></track></th>

  • <dd id="wtla9"><pre id="wtla9"></pre></dd>
    公司新聞
  • 您現在的位置:首頁 > 新聞資訊 > 公司新聞 >
  • 裝修實驗室前應工程調查把握以下幾個方面!
    來源:http://www.nexregen.com 瀏覽: 發布日期:2021-06-22
    裝修實驗室工程調查的主要目的是什么? 作為客戶如何與調查合作? 以下是實驗室技術員的介紹。 實驗室整改工程調查應把握以下幾個方面:
    What is the main purpose of decoration laboratory engineering investigation? How to cooperate with investigation as a customer? The following is the introduction of the laboratory technician. The investigation of laboratory rectification project should grasp the following aspects:
    1、施工單位應盡可能提供場地的總體平面圖,分層圖和實驗室圖,并應具有準確的尺寸,立面圖和土建圖的分層建筑物的高度。 根據民用建筑圖紙,設計人員可以了解建筑物空間結構的方向和具體位置,通風和電纜設置以及其他相關設備的安裝。
    1. The construction unit shall provide the general plan, layered drawing and laboratory drawing of the site as far as possible, and shall have accurate dimensions, elevation drawing and height of layered building in civil engineering drawing. According to the civil building drawings, designers can understand the direction and specific location of the building space structure, ventilation and cable settings, as well as the installation of other related equipment.
    2、感受現場建筑物與室內空間的空間比例和空間關系,檢查現場與甲方提供的建筑圖紙之間是否有不一致之處。如果發現現場與建筑圖紙之間存在差異,請記錄或變更及時。 了解建筑空間的承重結構,以免在設計中損壞承重構件。 注意施工設備,管道和接口的位置是否會影響設計創意的發展。 應注意結構“梁”和其他在建筑圖紙中容易被忽略且不容易找到的組件,它們是否在現場存在,是否存在以及它們的大小會影響空間的高度和空間 設計的形象。
    2. Feel the spatial proportion and spatial relationship between the site building and the indoor space, and check whether there is any inconsistency between the site and the architectural drawings provided by Party A. If there is any difference between the site and the architectural drawing, please record or change it in time. Understand the load-bearing structure of the building space, so as to avoid damaging the load-bearing components in the design. Pay attention to whether the location of construction equipment, pipelines and interfaces will affect the development of design creativity. It should be noted that structural "beams" and other components that are easily ignored and not easy to find in architectural drawings, whether they exist on site, whether they exist and their size will affect the height of the space and the image of the space design.
                                 實驗室裝修
    3、在現場調查并記錄組合關系和關鍵零部件的尺寸。 工程項目的現場規模測量主要包括長度和寬度(間隔和深度),地板高度,橫梁,門,窗,柱和管道的尺寸和位置。
    3. Investigate and record assembly relationship and dimensions of key parts on site. The site scale measurement of the project mainly includes the length and width (spacing and depth), floor height, size and location of beams, doors, windows, columns and pipes.
    尺度測量的方法:測量尺寸一般從總門開始,一個房間一個房間地按次序進行。平面尺寸的測量一般是在距地1-1.3m的距離,每測量完一個尺寸就記錄在繪制的平面框架草圖上,由于土建施工的原因一般會造成工地現場每個面的尺寸有誤差。當測量衛生間等場所的時候要多加注意一些管道、設施和設備的安裝位置,例如:座便器的坑口位置、給排水的管道位置、水表和氣表等的安裝位置等,要把這些設備的位置在圖樣上詳細地、準確地記錄下來。
    The method of scale measurement: the measurement is generally started from the main door, one room by one in order. The measurement of plane dimension is generally 1-1.3m away from the ground, and each dimension is recorded in the plane frame sketch drawn after measurement. Due to civil construction, there are errors in the dimension of each surface on the construction site. When measuring the toilet and other places, we should pay more attention to the installation position of some pipes, facilities and equipment, such as the pit position of toilet, the position of water supply and drainage pipes, the installation position of water meter and gas meter, etc., and record the position of these equipment in detail and accurately on the drawing.
    當平面的尺寸測量完畢后,仔細地檢查一下標有各個測量尺寸的平面草圖,看看是否還有疏漏的地方。檢查完畢后,開始測量垂直方向的尺寸,如果工程現場的頂部情況不是很復雜,一般只要記錄一些簡單的數據就可以了,如房間的凈高、梁底的高和寬、窗高和門高等數據。當工程現場情況較復雜時,還須繪制立面的草圖和頂棚的草圖,幫助記錄這些復雜情況和在平面上不能反映的尺寸。
    When the dimension of the plane is measured, carefully check the plane sketch marked with each measurement dimension to see if there are any omissions. After the inspection, start to measure the vertical dimension. If the top of the project site is not very complicated, it is generally enough to record some simple data, such as the clear height of the room, the height and width of the beam bottom, the height of the window and the height of the door. When the site conditions of the project are complicated, the elevation sketch and ceiling sketch must be drawn to help record these complicated conditions and the dimensions that cannot be reflected on the plane.
    相關標簽: 空氣凈化工程、實驗室裝修、無菌室裝修、
    亚洲妇女自偷自偷图片,亚洲av在线,欧美日韩,日产中文字幕在线精品一区,日韩三级电影