How to deal with the dull and stale laboratory decoration counter? According to the summary of this strategy to do, you may not know that the original laboratory cabinet can always maintain style.
1. Dust control. In spring, the laboratory often needs to open windows for ventilation, but it will also bring dust, so the laboratory cabinet dust removal becomes very important. When dedusting, try to use cotton cloth dipped in 70% concentration of ethanol solution to wipe the laboratory cabinet. Because wet cotton cloth can reduce conflicts and prevent scratching furniture, at the same time, ethanol also has the effect of sterilization and disinfection to ensure the cleanliness of furniture.
2. Clean regularly. If you want to remove the chemical reagents remaining on the surface of the laboratory cabinet, it is recommended to use chemicals for treatment. Such as alkaline reagent residue stains, should use weak acid reagent neutralization, and then clean with water. Need to pay attention to is, do not use with corrosive detergent, otherwise simple formation of corrosion on the table.
3. Daily care. If there is a stain on the surface of the laboratory cabinet, do not wipe it with force. You can use a brush to gently wash the part of the dirt. During the normal experiment, do not let the solid metal products or other sharp tools collide with the laboratory cabinet to protect its appearance from collision scars. Prevent the high temperature experiment on the experimental table to avoid the damage to the appearance of furniture.
4. Check regularly. Usually we should pay attention to whether the joints of the laboratory cabinets present the conditions of parts falling, degumming, tenon cracking, tenon loosening, etc. If the screw and other metal parts fall off, you can fill a thin wooden strip in the cleaned screw hole, and then install the screw from the beginning. If tenon cracking, then the need to ask the laboratory decoration furniture manufacturers professional maintenance personnel to deal with.