行業新聞
  • 您現在的位置:首頁 > 新聞資訊 > 行業新聞 >
  • 實驗室設計做好這六個方面,才能是好的設計?
    來源:http://www.nexregen.com 瀏覽: 發布日期:2021-06-01
    實驗室改造設計要完善六個方面,才能保證的實驗室的裝修設計達到標準,也才能算得上是好的實驗室改造設計。那么,設計的是什么?
    The laboratory decoration design should be improved in six aspects to ensure that the decoration design of the laboratory can reach the standard and be regarded as a good laboratory decoration design. So, what's the point of design?
    一:平面設計
    1: Graphic design
    重要的問題是安全實驗室的設計,這在圖形設計尤為重要,既要確保實驗室通風流暢,逃生通道打開。在實驗室和儀器表從墻上脫落的板凳有間距40厘米的,替補必須過道通往走廊,事故為了撤離后的工作人員。
    The important problem is the design of safety laboratory, which is particularly important in graphic design. It is necessary to ensure that the laboratory ventilation is smooth and the escape passage is open. In the laboratory and instrument table, there is a distance of 40 cm between the stools falling off from the wall, and the substitute must go through the aisle to the corridor, in order to evacuate the staff after the accident.
    二:單臺結構功能設計
    2: Structural and functional design of single station
    在實驗室研究設計發展階段,單臺結構系統功能不同可分為3部分學生進行,即:實驗臺、儀器臺、功能柜。其中,實驗臺分為學習物理實驗臺、化學實驗臺、生物實驗臺3類。儀器臺用于檢測儀器技術分析我們實驗室,其承重能力需要企業達到500Kg以上。功能柜有全木、鋼木2種,其主要作用是提高服務、儲存,主要管理功能是安全、等問題。
    In the development stage of laboratory research and design, the function of single structure system is different, which can be divided into three parts: experimental platform, instrument platform and function cabinet. Among them, the experimental platform is divided into learning physics experimental platform, chemical experimental platform and biological experimental platform. The instrument platform is used for the technical analysis of testing instruments. The load-bearing capacity of our laboratory needs the enterprise to reach more than 500kg. There are two kinds of function cabinets: full wood and steel wood. Their main functions are to improve service and storage. Their main management functions are safety and environmental protection.
                                  實驗室裝修
    三:給排水系統設計
    3: Water supply and drainage system design
    由于不同性質的供水和排水的,實驗室排水系統大致分為兩種類型,即:實驗排水。進行研究實驗室設,實驗室給排水的供水水嘴為急流水嘴、緩流水嘴,排水系統則是廢水排入廢水以及處理站,經過數據處理后排入管網。日常給排水參考建筑,排水設計則是廢水直接排入城鎮居民生活環境污水管網。
    Due to the different nature of water supply and drainage, the laboratory drainage system can be roughly divided into two types: experimental drainage. In the design of research laboratory, the water supply nozzles of water supply and drainage in the laboratory are rapid flow nozzle and slow flow nozzle, and the drainage system is that the wastewater is discharged into the wastewater treatment station, and then discharged into the pipe network after data processing. Daily water supply and drainage refer to buildings, and the drainage design is that the wastewater is directly discharged into the sewage pipe network of urban residents' living environment.
    四:電控系統設計
    4: Design of electronic control system
    這是實驗室的基本系統之一,通常用電分為兩部分:照明用電,動力用電。 其中,實驗室照明用電采用照明用電,動力用電用于各類儀器設備,電梯,空調等供電。
    This is one of the basic systems of the laboratory. The electricity consumption is usually divided into two parts: lighting and power. Among them, lighting power is used for laboratory lighting, and power is used for power supply of various instruments, elevators, air conditioners, etc.
    實驗室的電源應為交流及直流電源,插座應為單相及三相電源,并附有漏電保護開關、過載保護開關及穩壓要求。如果有儀器分析實驗室,應該有抗電磁干擾、接地和電磁。
    The power supply of the laboratory shall be AC and DC power supply, and the socket shall be single-phase and three-phase power supply with leakage protection switch, overload protection switch and voltage stabilizing requirements. If there is an instrument analysis laboratory, there should be anti electromagnetic interference, grounding and electromagnetic protection.
    五:送風系統設計
    5: Design of air supply system
    實驗項目需要使用的氣體的有四種,即:不可燃氣體(氬,氦等),可燃氣體,助燃氣體。這些氣體通過管道進入實驗室,從而使必須在線密封。
    There are four kinds of gases that need to be used in the experimental project, namely: non combustible gas (argon, helium, etc.), combustible gas and combustion supporting gas. The gas is piped into the laboratory, making it necessary to seal online.
    六:排風系統設計
    6: Design of exhaust system
    實驗研究項目有可能發展產生一些有害氣體,因此排風至關重要。實驗室進行設計的排風系統結構設計我們既要保證安全,又要節能。具體情況來說,排風設備主要包括:通風柜、原子吸收罩、萬向排氣罩、吸頂式排氣罩、臺上式排氣罩等。
    The experimental research project may produce some harmful gases, so the exhaust is very important. We should not only ensure safety, but also save energy. Specifically, the exhaust equipment mainly includes: fume hood, atomic absorption hood, universal hood, ceiling hood, platform hood, etc.
    相關標簽: 空氣凈化工程、實驗室裝修、無菌室裝修、
    男女祼交动态图h,在线不卡日本v一区二区,韩国一级片,日本中文字幕有码在线视频,日本高清色视频wwwcom